Winter Blasts Construction Job Report, AGC Economist Says

03/15/2007


“Calendar and climate quirks combined to chill construction employment in February, but nonresidential segments should rebound this month,” said Ken Simonson, chief economist for The Associated General Contractors of America.

Simonson commented last week on the February employment report from the Bureau of Labor Statistics.

“In February, construction employment tumbled by 62,000, seasonally adjusted—the largest one-month slide since 1991. Weather anomalies deserve some of the blame, along with the housing slowdown,” he observed.

“Employment estimates are based on the payroll period that includes the 12th day of each month,” Simonson explained. “In February, that included a week in which ice storms blanketed much of the United States, whereas in January, the 12th was the end of an exceptionally balmy week. As a result, some contractors may have started jobs in January that normally would not have been done until later. Conversely, hiring may have been postponed in mid-February.

“Aside from these anomalies, there are two reasons to think that nonresidential construction will resume adding jobs soon,” Simonson said. “First, architects and engineers, whose work gets turned into construction within months, added workers for the 36th straight month. A/E employment has risen nearly 5% t in the past 12 months. I expect their handiwork to show up in refinery, power plant, manufacturing, hotel and hospital construction spending over the next several months.

“Second, nonresidential construction categories have been growing, aside from the February hiccup,” Simonson said. “From February 2006 to February 2007, combined employment in nonresidential building, nonresidential specialty trades and heavy and civil engineering construction increased by 115,000 or 2.7%, nearly double the 1.5% rise in total nonfarm payroll employment. Meanwhile, Census Bureau data show that nonresidential construction spending is on a tear—up 15 percent in January compared to January 2006.

“I remain very confident that the nonresidential construction industry will be healthy right through 2007, and probably beyond,” Simonson concluded.

For a podcast discussing the latest construction jobs and spending trends, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me