"Wind to Hydrogen" Facility Offers New Template for Future Energy Production

A unique facility that uses electricity from wind turbines to produce and store pure hydrogen, offering what may become an important new template for future energy production, was unveiled earlier this year. The project is a collaboration of Minneapolis-based Xcel Energy and the National Renewable Energy Laboratory.

06/25/2007


A unique facility that uses electricity from wind turbines to produce and store pure hydrogen, offering what may become an important new template for future energy production, was unveiled earlier this year. The project is a collaboration of Minneapolis-based Xcel Energy and the National Renewable Energy Laboratory.

"Today we begin using our cleanest source of electricity--wind power--to create the perfect fuel: hydrogen," said Richard Kelly, Xcel Energy chairman, president and CEO. "Converting wind energy to hydrogen means that it doesn't matter when the wind blows since its energy can be stored on site in the form of hydrogen."

The facility links two wind turbines to electrolyzers, which pass the wind-generated electricity through water to split the liquid into hydrogen and oxygen. The hydrogen can be stored and used later to generate electricity from either an internal combustion engine turning a generator or from a fuel cell. In either case, there are no harmful emissions and the only by-product from using the hydrogen fuel is water.

Located at NREL's National Wind Technology Center near Boulder, Colo., a new building houses the electrolyzers and a device to compress the hydrogen for storage; four large, high-tech tanks to store the hydrogen; a generator run by an engine that burns hydrogen; and a control room building, where computers monitor all the steps of the process.

"Advancing knowledge and sharing innovation are among NREL's primary goals," NREL Director Dan Arvizu said. "Our growing strategic partnership with Xcel Energy helps us reduce the time and effort between research discoveries and sharing the benefits of what we learn with energy consumers."

NREL researcher Peter Gotseff examines the Teledyne electrolyzer for the wind-to-hydrogen project.
Currently, there are limitations to both wind power and hydrogen. Wind farms only generate electricity when the wind is blowing, which is about one-third of the time in the United States. This creates the need for backup generation, which is usually fossil-fueled.

"By marrying wind turbines to hydrogen production, we create a synergy that systematically reduces the drawbacks of each," Kelly said. "Intermittent wind power is converted to a stored fuel that can be used anytime, while at the same time offering a totally climate-friendly way to retrieve hydrogen, to power our homes and possibly cars in the future."

For more information about the wind-to-hydrogen project, go to www.nrel.gov





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me