When LEED isn't achieved, who's to blame?

When building owners anticipate tax relief and promise certain sustainable features to tenants, not earning the projected U.S. Green Building Council LEED rating becomes a financial and legal problem, according to a Nashville Post article. The liability involved in beached LEED ambitions is new legal ground, largely because there's yet to be a court judgment on the books to set a precedent.

08/01/2009


When building owners anticipate tax relief and promise certain sustainable features to tenants, not earning the projected U.S. Green Building Council LEED rating becomes a financial and legal problem, according to a Nashville Post article. The liability involved in beached LEED ambitions is new legal ground, largely because there's yet to be a court judgment on the books to set a precedent. But just because the courts have yet to see such a case doesn't mean the issue isn't brewing.

Design professionals, contractors, and building owners are the most likely targets for breach of contract lawsuits or negligence claims in these situations, according to Jeffrey King, an attorney and LEED AP. For example, if an engineer designs an HVAC system and it's installed properly, yet the system fails to achieve the desired reductions, fault is likely with the design team. However, if on paper the design is flawless, but a problem occurs in the installation, contractors will be targeted.

"Potential suits against design professionals are likely breach of contract or malpractice cases, professional liability cases," King said. "There [are lots] of questions as to whether the existing professional practice liability policies of some of these professionals cover these particular risks."





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me