Watt Stopper/Legrand dimming photosensor

Promote sustainable building practices with the LS-301 Dimming Photosensor from Watt Stopper/Legrand.

05/01/2008


Promote sustainable building practices with the LS-301 Dimming Photosensor from Watt Stopper/Legrand. The model features a handheld setup remote to facilitate quick and convenient commissioning. All adjustments are made using an intuitive remote control, so there is no need for tools or ladders. An optional occupant remote control permits the automatic lighting level to be temporarily overridden, if needed, without changing the setpoints. The LS-301, which controls standard 0 to 10 V dc electronic dimming ballasts, can be used as one element of a green lighting design that minimizes energy use and keeps operating costs in check. The model's sliding setpoint algorithm allows the controller to compensate for the disparate spatial distribution of daylight and electric light. By having two different setpoints for day and night, the target setpoint changes based on the current light level conditions. Additionally, the spectral response of the LS-301's photodiode has been carefully tuned to match the photopic curve; the light perceived by the human eye. By sensing only visible light, the photosensor does not over-dim or under-dim. Together, these features result in a balanced contribution of electric light at all times, that adjusts subtly and is comfortable for occupants.

Lightfair booth No. 1839

www.wattstopper.com

Quick Response #17





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me