Watertight miniature switches

The V15W Series is designed for consumer and industrial applications where spillage and water can be a factor.

11/23/2011


The V15W series of watertight miniature switches are designed for situations where water and spillage might be a factor. Courtesy: HoneywellHoneywell's (NYSE:HON) Micro Switch Basic Switch line has been expanded with the addition of the V15W Series of Watertight Miniature Switches. With an IP67 waterproof seal rating and rated up to 10 amps, Honeywell’s V15W can be used in a wide range of high-current consumer and industrial applications where spillage or water could be a factor. Potential applications include off-road vehicles such as ATVs, golf carts, lawn mowers, and snowmobiles; construction and agricultural machinery; industrial equipment such as factory floor wash-down machinery; and medical equipment such as hospital beds, dental chairs and foot pedals.

Honeywell’s watertight V15W basic switches are designed to be configurable and include a wide variety of actuators, terminals, and electrical and operating characteristics. They also satisfy UL and other agency requirements. Able to operate in a variety of difficult environments, the watertight switches are available in three options for protection: sealed plunger, dust-tight (with epoxy seal on terminals) and pre-leaded.

www.honeywell.com 

Honeywell International

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

Industrial sensor channel: controleng.com/sensors



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me