Water sensor

Provide protection from water damage with the AquaSwitch from EDC International.

By Consulting Specifying Engineer Staff April 1, 2008

Provide protection from water damage with the AquaSwitch from EDC International. The water sensor is a fully encapsulated electronic circuit, controlling an isolated, powerful 5-amp relay that is added to secondary drain pans for air-handling equipment, hot water heater safety pans, laundry room floor pans, and wherever there is a need for protection from water damage. When water levels fill to the “switch-on” level, the AquaSwitch activates the circuit. The device is not affected by oil or other contaminates on the surface of the water.

www.edcinternational.com

Input #5 for Reader Service