Water-cooled centrifugal chiller

The YORK YK-EP "Efficiency Plus" water-cooled centrifugal chiller achieves 5% capacity and efficiency improvements over its previous model.

04/14/2016


The YORK YK-EP "Efficiency Plus" water-cooled centrifugal chiller achieves 5% capacity and efficiency improvements over its previous model. It uses a patent-pending mechanical compression economizer cycle, which uses a mechanical economizer cycle to boost performance over conventional chiller platforms. The YK-EP uses a YORK OptiSpeed variable speed drive, which can accept medium- or high-voltage power, trimming average annual energy consumption by up to 30%. The chiller is able to continuously operate with as low as 50°F low-entering condenser-water temperature, trimming instantaneous energy consumption as much as 50%. Additionally, in facilities with multiple YK-EP chillers, energy savings can be accomplished with series-counter flow arrangement.

Johnson Controls

www.johnsoncontrols.com


This product is a Finalist in the
Consulting-Specifying Engineer 2016 Product of the Year program. View more Finalists and cast your vote at www.csemag.com/votepoy (voting closes June 30, 2016).



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me