Water a competitive advantage for manufacturing

From its effective use of developing products for the manufacturing sector, water is seen as a critical opportunity, and a critical challenge

03/07/2014


Water is not seen by most as a manufacturing tool, energy source, or even a
 source of economic growth. But in fact, water is all of those things, according to Markos Tambakeras, chairman of Xylem Corp. Tambakeras spoke at the March 7 MFG Meeting in Phoenix, sponsored by the Association for Manufacturing Technology (AMT), the National Tooling and Machining Association (NTMA), and the Precision Metalforming Association (PMA).

Pointing to issues such as climate change, significant drought areas in the U.S., population growth around the world, and the importance of water in growing food, Tambakeras said the issues surrounding water will continue to grow. "Water is becoming a political and politicized issue," Tambakeras told the 600 attendees. 

He cited eight opportunities and issues around water issues that will impact manufacturers:

  1. Water is a source of global competitive advantage.
  2. America's water resources are vital to unblock our energy resources.
  3. Water is an operational cost and a risk for all manufacturers.
  4. In order to address cost and risk, manufacturers must consider productivity, quality, and the resilience of one's system. "The size of a company does not matter," Tambakeras said.
  5. The water sector is going to increasingly see more investment. "Part of it is pent-up demand because of underspending economically," he said. Another factor will revolve around population growth, both in developed and developing countries.
  6. There are substantial opportunities for cities and state to leverage water availability to drive economic growth.
  7. Water is a substantial opportunity for manufacturers with water industry-related products.
  8. Smart utilization of water is everyone's responsibility.

 

 

 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me