Washdown connectors for harsh conditions, cordsets

Belden's Lumberg Automation brand wash-down connectors are optionally available as single-ended or double-ended actuator/sensor cord sets and are resistant to chemicals and cleaning agents.

07/03/2013


Belden's Lumberg Automation brand wash-down connectors are optionally available as single-ended or double-ended actuator/sensor cord sets, these connectors come with an M8 or M12 thread and a hexagonal stainless steel coupling nut. 

Resistant to aggressive chemicals and cleaning agents, these new connectors have an operating temperature range of -40 to +105 C. They also satisfy IP67, IP68 and IP69K requirements for ingress protection. As a result they can be high-pressure cleaned, and are therefore ideally suited for use in areas where stringent rules of hygiene apply (such as in the food and beverage sector, chemical and pharmaceutical industries). The seal of quality by ECOLAB attests to the suitability of the connectors for wash-down applications worldwide.

Other features include gold-plated crimp contacts, high shock and vibration resistance, and simple installation. The wash-down connectors guarantee reliable data transmission even under harsh environmental conditions to keep equipment up and running.

Belden Inc.

www.belden.com 

- Edited by Control Engineering, Plant Engineering. See other industrial networking products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me