Volume water heaters

Mighty Therm 2 boiler by Laars combined with 80-gal storage tank

03/20/2012


The Mighty Stack volume water heater by Laars combines the Mighty Therm 2 boiler with an 80-gal storage tank resulting in 199, 300, and 399 MBH sizes fueled by natural or propane gas. With less than 10 ppm NOx emissions, the sealed-combustion Mighty Stack offers 83% thermal efficiency and meets low lead requirements. This light commercial product is designed for apartments, restaurants, hotels, laundries, schools, and businesses. Key assets include its small footprint, a removable upper boiler section for easy handling, common venting, and up to 50 ft of Category I or III venting. Thanks to the rugged steel cabinet, the Mighty Stack can be installed inside or outside. Standard components include tank aquastat, pressure-relief valve, hot surface pilot ignition, and an integral induced-draft fan to allow for either horizontal or vertical venting.

Laars

www.laars.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me