Variable speed starter

The PowerXL DE1 variable speed starter for reduced installation time, space saving design and increased reliability.

05/12/2015


The PowerXL DE1 variable speed starter for reduced installation time, space saving design and increased reliability.Eaton has introduced the PowerXL DE1 Variable Speed Starter (VSS) into the North American and European markets. The device allows any panelbuilder or machine builder to simplify their design, increase energy efficiency, and reduce installation and commissioning time. Effortless, adjustable motor speed helps customers achieve the required energy efficiency levels while also simplifying commissioning. The DE1's space saving design offers industry-leading ease of use. As the VSS was designed without a keypad, there are other ways to configure the DE1 for the application if the defaults are not sufficient. The plug-in DXE-EXT-SET configuration model is an option for the user to adjust default settings of key parameters such as ramp time, motor protection, and control terminal function using a screwdriver. The DE1 can connect with a remote mount keypad or with the drivesConnect PC Tool to allow the user to monitor and change additional parameter.

Eaton

www.eaton.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me