Variable speed control for 3-phase motors

Vari-Green Drive Model VGD-100 is a factory-mounted and wired variable speed control for 3-phase motors up to 10 hp.

06/07/2016


Vari-Green Drive Model VGD-100 is a factory-mounted and wired variable speed control for three-phase motors up to 10HP. Courtesy: GreenheckGreenheck's Vari-Green Drive Model VGD-100 is a factory-mounted and wired variable speed control for 3-phase motors up to 10 hp. Internally mounted within the fan housing, the Vari-Green Drive virtually eliminates voltage spikes that can contribute to motor performance issues and motor failure. The pre-programmed drive uses R3 filtering technology to reduce electrical harmonics back into the building. No field installation or start-up is required. The Vari-Green Drive optimizes energy savings and efficiency of ventilation systems in a variety of applications.

Greenheck

www.greenheck.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me