Variable refrigerant flow series updated

The W-Series has been updated its variable refrigerant flow (VRF) zoning WR2- and WY-Series Modular Water Source Units to be made smaller and lighter and have plate type heat exchangers and both can be connected to any VRF zoning indoor unit.

07/08/2014


The W-Series has been updated its Variable Refrigerant Flow (VRF) zoning WR2- and WY-Series Modular Water Source Units to be made smaller and lighter and have plate type heat exchangers and both can be connected to any VRF zoning indoor unit. Courtesy: MiMitsubishi Electric's W-Series has updated its variable refrigerant flow (VRF) zoning WR2- and WY-Series Modular Water Source Units. Both the WR2- (heat recovery) and WY-Series (heat pump) are available in smaller and lighter units with plate type heat exchangers and both systems operate in either cooling or heating modes. The WR2- and WY-Series systems can be connected to any of the VRF zoning indoor units and can be operated and managed with the CITY MULTI Controls Network (CMCN), which offers a variety of tools and software applications to provide local and centralized control over a building's HVAC systems.

Mitsubishi Electric

www.mehvac.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me