Value(-free) Engineering

Value engineering: Both the term and the concept are the roots of most evil in building design, I believe. Before you turn the page, please allow me to explain.First of all, "value engineering" is a misleading misnomer. It is rarely undertaken by an actual, licensed engineer, and the fancy-sounding endeavor is often little more than an exercise in cheapening a well-designed project.

12/01/2000


Value engineering: Both the term and the concept are the roots of most evil in building design, I believe. Before you turn the page, please allow me to explain.

First of all, "value engineering" is a misleading misnomer. It is rarely undertaken by an actual, licensed engineer, and the fancy-sounding endeavor is often little more than an exercise in cheapening a well-designed project. Value engineering is a highfalutin synonym for "substitutions," many of which cut to the core of how a proposed building will operate, function and perform.

That's the first reason: Value engineering, like the corporate terms "re-engineering" or "downsizing," is often a plain-faced lie. There may be no engineering going on at all. Reduced to plain language, "re-engineering" usually means "people being handed pink slips." And "value engineering" almost always means "systems and components being substituted." Let's call it what it really is.

But there's more to this problem than deception and semantics. "Value engineers," if such people actually exist, generally lack the sound moral and ethical values that guide real engineers and architects, including:

  • Sustainability. Value engineering often undermines the environmental knowledge that can inform design intent.

 

  • Life-cycle cost. Value engineering is presented as a neutral comparison of design alternatives. In fact, most proposed changes invariably reduce first cost but pay no heed to life-cycle implications, such as higher operational costs.

 

  • Energy efficiency. Multiply "life-cycle cost," above by a factor of 10.

 

  • Technical foundation. Value engineering is often undertaken by unqualified persons or organizations. And that gets us back to square one: If it's not being done by an engineer, it's just not engineering. It's something else altogether, and it may be very nice and well-intentioned and maybe even technically OK, but if it's done by a construction manager, an owner's representative, a general contractor or a subcontractor, it's not engineering.

We should feel strongly about an industry-wide practice that links the venerable field of engineering with a shoddy and unethical practice in the hopes of making it respectable. VE can be an important level of review for building owners and construction firms, but only if it is undertaken by the right professionals.

If someone says, "Hey, we value-engineered the project," calmly ask if an engineer did the work. If it wasn't an engineer, the "engineering" can be called into question-as can any claim to "value."





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me