Uptime Institute retools data-center availability tiers

Data center end-users will make recommendations for updated tier standards.

08/25/2009


 

The Uptime Institute 's data-center availability rating system, which consists of four tiers with increasing uptime expectations, has been the de facto standard for data center availability in the industry. Thanks to a new end-users advisory committee, changes to the Uptime Institute's data center availability tiers could come as soon as early 2010, according to a report on SearchDataCenter.com .

In the past, some people have criticized the tier system, saying it isn't as flexible as it should be and needs to be updated. The Uptime Institute responded in May 2009 by forming an advisory committee of 32 data center end users who are also Uptime members.

Mike Wills, a committee member, said that one of the committee's first tasks is to examine the Tier 1 definition for the least available data center. These facilities are typically defined as "bare bones," according to Wills, but the group may want to distinguish a non-redundant data center from a server closet or a mere server rack in an office.

Hank Seader, an Uptime consultant who helped develop the initial tier rating system added that another potential change could be in the definition of the Tier 2 standard, which requires that some parts of the data center infrastructure be redundant but doesn't get into details.

The institute also may work to make the standard more usable internationally. As an example, Wills explained that the electrical distribution in the United States is typically done at 480 V, while in Canada it's 600 V, but building codes differ by country and the tiers should probably incorporate those differences into its system, Wills said.

Data center availability ratings can help determine how to equip your data center. Read the Consulting-Specifying Engineer feature article: Data center or telecom room?



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me