UPS System Helps Recharge Customer Service

Calling a customer service help line can be frustrating. What's even worse is when the customer service representative asks you to call back later— when they have their computers up and running again. That's just what the customers calling one nationwide retailer's Alabama call center were hearing on a regular basis.

06/01/2003


Calling a customer service help line can be frustrating. What's even worse is when the customer service representative asks you to call back later— when they have their computers up and running again.

That's just what the customers calling one nationwide retailer's Alabama call center were hearing on a regular basis. The cause of power disruptions was no mystery. Voltage sags and outages caused by the area's frequent thunderstorms were wreaking havoc on the facility's telephone and computer systems.

The situation was intolerable for a large nationwide retailer that operates a network of call centers as the point of contact for thousands of incoming customer service calls. Associates are networked through the company's computer system so that they can quickly handle customer concerns.

Even a momentary disturbance meant a 15- to 30-minute system restart, costing up to $8,000 and damaging customer goodwill. Managers at the call center knew they had to address the issue. With some 800 workstations accessing 20,000 customer accounts a day, the potential impact to the company's customers—and its own bottom line—was too great to ignore.

The local utility's energy solutions division suggested several possible remedies.

One idea was to install a small uninterruptible power supply (UPS) system at each workstation. However, managers decided this approach would be too expensive and complex to implement.

Installing a large, conventional UPS system also was investigated, but this would have required expanding the existing computer room.

Instead, managers opted for a 250-kW UPS that could be installed outdoors and protect the facility's entire load. The unit provides 30 seconds of backup at full load and 60 seconds at half load to provide the facility with 100% protection from power events. It is also integrated with an existing backup generator, providing smooth cut-over during extended power outages.

The new system earned back its cost within the first five months of service, allowing continuous operation through more than 50 power events. In fact, for just one particularly stormy day alone, savings from prevention of computer downtime and related losses were estimated at more than $30,000.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me