University modernizes with energy-efficient solutions

Self-funded improvements net energy savings and boost comfort on the Brenau University campus.

06/26/2013


Brenau University, a women’s college located in Gainesville, Ga., is noted for its preserved buildings and picturesque grounds. However, behind the scenes there were major issues related to its environmental systems. Courtesy: ABM IndustriesBrenau University, a women’s college located in Gainesville, Ga., is noted for its preserved buildings and picturesque grounds. However, behind the scenes there were major issues related to its environmental systems. 

With no money in its budget for replacement equipment, Brenau turned to ABM Industries to help create a strategy for energy-efficiency improvements. Dr. Wayne Dempsey, Brenau’s executive VP and CFO, was confident in the positive results that could be achieved because he had implemented ABM’s bundled energy solutions (BES) during his tenure in the same role at another college. (For more information about the application of ABM’s BES program in upgrading a university property, see the video, “ABM/Linc Columbia College BES Client Video,” published by Columbia College in Columbia, S.C.) This approach would allow the university to use existing funds to pay for major improvements, including new heating, air conditioning, controls, and lighting systems. 

Challenges 

Though it had tried to repair and maintain its legacy systems, Brenau was losing ground in reducing its deferred maintenance backlog. Traditional means to raise the capital needed to upgrade these mission critical systems, including raising student fees or engaging in a charitable campaign, were not options, making Brenau’s financial challenges very similar to those experienced by many of ABM’s private university and college clients. 

To confront these challenges, ABM devised a strategy based on its BES program that drives costs out of its clients' operating budgets to allow savings to be reallocated to fund mission critical facility needs. First, the firm conducted comprehensive design engineering to formulate an optimal energy efficiency solution using HVAC systems, controls, and high-efficiency lighting.  ABM’s engineering analysis identified significant operational savings that Brenau could use to fund the proposed energy improvements. 

Improvements net results 

ABM installed an energy monitoring system, including linear regression software to analyze utility bill data such as usage costs, kilowatt-hours used, kilowatt demand, and natural gas use to determine baselines for comparative analysis. The regression models compare operating costs between installing improvements and leaving the facility “as is.” These models include weather data because weather has a large impact on heating and cooling expenses, and in turn allows ABM to present more accurate findings. 

Improvements included new HVAC systems, controls, and lighting for 13 university buildings. The library, where temperature and humidity is critical, received all new rooftop air conditioning and controls designed to address humidity concerns. Other buildings that were modernized include a performing art auditorium, pool, dining hall, and several dormitories. Also, a very inefficient central plant boiler was decommissioned and replaced with heating units in the individual buildings, resulting in significant utility savings. 

The installation phase took approximately 9 months and was fully completed in early 2008. ABM has guaranteed the cost savings, and the results are being monitored over 10 years. As a result of the changes, Brenau now has better control of its buildings and can focus on project management rather than repairs. Quarterly energy audits have shown savings every quarter since the program was implemented. Each year since project completion, Brenau has experienced a minimum of: 

  • $300,000 in energy and resources savings
  • 27% decrease in total energy use
  • 10% kWh electricity savings resulting in a 1,000,000+ kWh reduction for each of the last 4 years
  • 84% reduction in water usage (approximately 8 million gal annually)
  • 46% savings in natural gas.  

With a zero budget impact, Brenau’s campus is now more comfortable for its students and faculty. The modernization has allowed Brenau to focus its precious capital resources on programs and resources that are focused on achieving its strategic plan.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.