Ultrasonic flow meter

F-4400 portable clamp-on ultrasonic flow meter is designed with no moving parts for testing and validating flow.

03/08/2016


F-4400 portable clamp-on ultrasonic flow meter is designed with no moving parts for testing and validating flow. Courtesy: OniconOnicon Inc.'s F-4400 portable clamp-on ultrasonic flow meter is designed with no moving parts for testing and validating flow. The battery-operated portable meter uses clamp-on transducers to measure flow through the pipe wall. It is designed for use with pipes ranging from ½- to 48-in. diameters and works with most commonly used pipe materials. The F-4400 can be powered for up to 18 hours via the battery or it can operate continuously with the ac power adapter. The data logger can capture up to 300,000 points in intervals ranging from 10 seconds to 5 minutes. A 4-20 mA output is also available when operating from the ac power adapter.

Onicon

www.onicon.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me