UC Davis Extension Announces Fall Engineering Courses

UC Davis Extension announced that this fall the university's Engineering and Science department is offering courses in fire protection and building design.

06/27/2007


UC Davis Extension announced that this fall

The following courses will take place October through December 2007 in Davis:

Fire Alarm and Detection Systems examine the fundamentals of fire protection signaling systems. Code requirements for occupancies as well as basic codes and standards governing design will also be reviewed. Instructor Gary Rose has been a fire protection engineer with the U.S. General Services Administration for 14 years. The class is scheduled for Tuesdays, Oct. 9 through Dec. 11, 6-9 p.m.

Building Design for Research Laboratories explores, in conjunction with the 2007 California Building Code,for Friday, Oct. 26, 9 a.m.-4:30 p.m.

Building Design for Hazardous Occupancies focuses ondesign requirements. Also taught by Jerry Cunningham, the class is scheduled for Friday, Nov. 30, 9 a.m.-4:30 p.m.

For more information or to enroll, call toll free (800) 752-0881, visit www.extension.ucdavis.edu/engineering or email extension@ucdavis.edu .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me