Two-in-one humidification system

DL Series two-in-one humidification system is two adiabatic humidification methods intelligently combined.

04/29/2016


DL Series two in one humidification system is two adiabatic humidification methods intelligently combined. Courtesy: NortecNortec's DL Series two-in-one humidification system is two adiabatic humidification methods intelligently combined. This humidifier relies on both atomization and evaporative systems. The low-pressure atomizing nozzles have an adjustable spray and are optimally distributed over the entire cross-section of the air handler. This ensures high evaporation and uniform humidity distribution. The patented evaporation unit made of premium ceramic panels placed downstream of the nozzles acting as a secondary evaporative humidifier. It captures the humidifying water and carries out the re-evaporation. It requires short amount of absorption distance of any nozzle system and because of the additional evaporative process can add maximum humidity to the duct or air handler.

Nortec

www.humidity.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me