Two-beam ultrasonic flowmeter for high flow rates

Optisonic 8300 two-beam ultrasonic flowmeter is capable of handling high flow rates of superheated steam.

07/18/2016


Optisonic 8300 two-beam ultrasonic flowmeter is capable of handling high flow rates of superheated steam. Courtesy: KrohneKrohne's Optisonic 8300 two-beam ultrasonic flowmeter is capable of handling high flow rates of superheated steam, making it suitable for power plant boiler and plant efficiency monitoring, energy balancing, and inter-company steam billing. Optisonic 8300 features a full bore flow sensor without moving parts or obstructions, and an overall sturdy construction with no cables or sensitive parts exposed. The system is available in various sizes and is suited to high flow rates. The flowmeter is rated for pressure up to 3625 psi and temperature up to 1004°F. Temperature and pressure sensors connected to the device provide the integrated flow computer with data to calculate steam mass flow.

Krohne

www.KROHNE.com/northamerica



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me