Toyota plant up and running in U.S.

Toyota has reopened their plant in Buffalo, WV making engines and transmissions.

06/13/2011


After production slowdowns and numerous non-production days as a result of the Great Recession, vehicle recalls and parts shortages caused by the March 11 earthquake and tsunami in Japan, Toyota's plant in Buffalo, WV is making engines and transmissions again.

Last week was the last non-production week on the plant's schedule. Employees report for work and are paid on non-production days but don't make any engines or transmissions. Instead, they train and work on quality improvements. Some voluntarily work on community projects.

Throughout the economic downturn, recalls and disasters in Japan, Toyota has not laid off any full-time employees."

It's great to be back in business," Sandra Maynard, external affairs specialist at the plant, said on Tuesday.

On May 11, Toyota announced it would boost production in North America earlier than expected following the earthquake and tsunami. The company said that beginning this month, overall North American production would reach approximately 70 percent of normal levels, up from approximately 30 percent in May.

Toyota said its goal is to return to fully normalized production by late this year.

Toyota Motor Sales U.S.A. reported May sales of 108,387 units, a 27.9 percent decrease compared to the same month a year ago. Bob Carter, Toyota Division group vice president and general manager of Toyota Motor Sales U.S.A., said in a June 1 prepared statement, "As expected, May was an especially challenging month due mainly to uncertainties about our production forecast. But thanks to the tremendous efforts of our manufacturing team members and suppliers, we are ramping up much faster than expected."

Beginning this month, Japan production will be at 90 percent of normal levels, and eight of 12 North American-built vehicles will be at 100 percent," he said. "With more vehicles arriving at our dealerships and enhanced dealer support programs gaining traction with customers, we're optimistic that our sales outlook will continue to improve."

When the Buffalo plant was not producing, about 60 employees volunteered to help refurbish four houses in Ceredo, WV that are owned by Golden Girl Group Home, a nonprofit organization that provides shelter for 24 dependent, neglected and pre-delinquent girls who are unable to make a successful adjustment in their natural homes or foster care homes.

Toyota has nearly 1,100 employees at Buffalo and more than $110.5 million annual payroll.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me