Top 5 Consulting-Specifying Engineer Articles, September 11-17: Arc flash mitigation, MEP Giants, 2017 Product of the Year winners, and more

Arc flash mitigation, MEP Giants, 2017 Product of the Year winners, understanding overcurrent protection, and LEDs were Consulting-Specifying Engineer's five most clicked articles from last week, September 11-17. Were you out last week? You can catch up here.

By Sierra Grayson, Production Coordinator, CFE Media September 18, 2017

Consulting-Specifying Engineer’s top 5 most read articles online, for September 11-17, covered arc flash mitigation, MEP Giants, 2017 Product of the Year winners, understanding overcurrent protection, and LEDs. Link to each article below.

1. The basics of arc flash mitigation

Electrical engineers must understand the codes, standards, and design requirements when engineering for arc flash mitigation.

2. MEP Giants revenue increases, along with staffing concerns

The 2017 MEP Giants gross revenue increased as compared with last year, likely due to company mergers and larger and more varied projects. MEP/FP design revenue also increased.

3. 2017 Product of the Year winners

Consulting-Specifying Engineer readers have cast their votes for the 2017 Product of the Year; read about the winners.

4. Understanding overcurrent protection

Steven Eich walks you through the complexities of understanding overcurrent protection.

5. Your questions answered: Lighting: Designing lighting systems with LEDs

The Aug. 17, 2017, “Lighting: Designing lighting systems with LEDs” webcast presenters addressed questions not covered during the live event.

This list was developed using CFE Media’s web analytics for stories viewed on www.csemag.com, September 11-17, for articles published within the last two months.


Sierra Grayson, Production Coordinator, CFE Media, sgrayson@cfemedia.com.