Top 5 Consulting-Specifying Engineer Articles, October 31-November 6: Condensation and condensate, high-efficiency hot-water systems, low-temperature water-heating options, more

Articles about condensation and condensate, designing high-efficiency hot-water systems, low-temperature water-heating options, the engineer shortage, and the recipe to become a principal engineer were Consulting-Specifying Engineer's five most clicked articles from last week, October 31-November 6. Were you out last week? You can catch up here.

11/07/2016


Consulting-Specifying Engineer's Top 5 most read articles online, for October 31- November 6, covered evaluating condensation and condensate, designing high-efficiency hot-water systems, evaluating low-temperature water-heating options, the engineer shortage, and the recipe to become a principal engineer. Link to each article below.

1. Evaluating condensation and condensate

Learn methods to capture, control, dispose, and derive the condensation requirements within HVAC systems.

2. How to design high-efficiency hot-water systems for hospitals

Boilers for heating and domestic hot-water systems are used in many hospitals and health care facilities. This looks at the codes and standards that regulate boiler specification, plus energy efficiency and efficacy of hot-water heating systems.

3. Evaluating low-temperature water-heating options

To take advantage of HVAC energy savings, engineers must change their thinking on heating-water temperatures, as the trend drives toward greater sustainability.

4. The coming engineering shortage

The engineering industry must address the skills gap.

 

5. The recipe to becoming a principal engineer

Start developing your skill set early. The engineering industry must address the skills gap.

Brana Webb, production coordinator, CFE Media, bwebb@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me