Top 5 Consulting-Specifying Engineer Articles, October 3-9: 2016 MEP Giants, 40 Under 40 program, designing with liquid-immersion cooling systems, more

Articles about the 2016 MEP Giants, 40 Under 40 program, designing with liquid-immersion cooling systems, applying NFPA 75 in data centers, and a case study about roof-mounted PV systems were Consulting-Specifying Engineer's five most clicked articles from last week, October 3-9. Were you out last week? You can catch up here.

10/10/2016


Consulting-Specifying Engineer's Top 5 most read articles online, for October 3-9, covered the 2016 MEP Giants, 40 Under 40, designing liquid-immersion cooling systems, applying NFPA 75 in data centers, and a case study about roof-mounted PV systems. Link to each article below.

1. 2016 MEP Giants

The MEP Giants program lists the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms in the United States. The in-depth analysis of these firms appears in the August issue and reveals what's going on in the industry and how it has changed over the past few years.

2. 40 Under 40 program

Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals in the engineering community supporting the building industry. We want to shape the future of young engineers, and will do so by recognizing and encouraging them through mentoring articles in the magazine, young engineer networking events, and the 40 Under 40 program.

3. Designing with liquid-immersion cooling systems

In simple thermodynamic terms, heat transfer is the exchange of thermal energy from a system at a high temperature to one at lower temperature. In a data center, the information technology equipment (ITE) is the system at the higher temperature.

4. Applying NFPA 75 in data centers

NFPA 75: Standard for the Fire Protection of Information Technology (IT) Equipment covers the requirements for the protection of IT equipment from fire damage. The current edition (2013) has not been adopted by all jurisdictions; however, fire protection engineers should be well aware of its requirements because of the large number of IT facilities and data centers.

5. Case study: Roof-mounted PV system

https://www.mandalaybay.com/en.htmlMandalay Bay Resort and Casino in Las Vegas has the biggest roof-mount solar photovoltaic (PV) array (as of July 2016) in the U.S., with a 6.4-MW dc-rated system on a single roof. It is also the second-largest roof-mount solar system in the world. 

This list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, October 3-9, for articles published within the last two months. 

Emily Guenther, associate content manager, CFE Media, eguenther@cfemedia.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me