Top 5 Consulting-Specifying Engineer articles, October 27 to November 2: Selecting pumps and circulators, arc flash hazards, active and passive fire protection, more

Articles about selecting pumps and circulators, mitigating arc flash hazards, active and passive fire protection, specifying passive firestop systems, and building energy modeling were Consulting-Specifying Engineer’s five most clicked articles from last week, October 27 to November 2. Were you out last week? Miss something? You can catch up here.

11/03/2014


Consulting-Specifying Engineer Top 5 most read articles online, for Oct. 27 to Nov. 2, covered selecting pumps and circulators, mitigating arc flash hazards, active and passive fire protection, specifying passive firestop systems, and building energy modeling. Link to each article below.

1. Sizing, selecting pumps and circulators

By making correct pump and piping selections, a hydronic system can operate at or near peak efficiency, avoiding cavitation and vibration. Here's a look at relevant codes and best practices. 

2. Mitigating arc flash hazards

Engineers should know about selecting the appropriate risk-reducing strategies to help their clients ensure compliance with NEC, NFPA 70E, and OSHA. 

3. Balancing active and passive fire protection

Fire protection engineers can and should consider the building's construction, fire suppression systems, and smoke control when designing fire protection systems. 

4. Specifying passive firestop systems

Fire-rated wall assemblies and passive firestop systems are key elements to the design of all commercial buildings. 

5. Applying building energy modeling

Whole building energy modeling techniques and software are crucial for designing code-compliant buildings. At the same time, this near-mandatory exercise introduces opportunities for engineers to add significant value to projects.

The list was developed using CFE Media's web analytics for stories viewed on csemag.com, October 27 to November 2, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me