Top 5 Consulting-Specifying Engineer articles, November 3-9: Applying building energy modeling, commissioning giants, engineering workable office space, more

Articles about building energy modeling, commissioning giants, engineering workable office space, sizing and selecting pumps and circulators, and managing power through networked electrical systems were Consulting-Specifying Engineer’s five most clicked articles from last week, November 3-9. Were you out last week? Miss something? You can catch up here.

11/10/2014


Consulting-Specifying Engineer Top 5 most read articles online, for Nov. 3-9, covered building energy modeling, commissioning giants, engineering workable office space, sizing and selecting pumps and circulators, and managing power through networked electrical systems. Link to each article below.

1. Applying building energy modeling

Whole building energy modeling techniques and software are crucial for designing code-compliant buildings. At the same time, this near-mandatory exercise introduces opportunities for engineers to add significant value to projects. 

2. Cx Giants make their mark

The 2014 Commissioning Giants had several new entries this year. The 15 firms reported a total of more than $351 million in revenue dedicated to commissioning new buildings or retro-commissioning existing buildings. 

3. Engineering workable, successful office space

Whether new or retrofit, office buildings can be a challenge for the mechanical, electrical, plumbing (MEP), or fire protection engineer. A team of experienced professionals offers advice on what to expect, and how to come out on top. 

4. Sizing, selecting pumps and circulators

By making correct pump and piping selections, a hydronic system can operate at or near peak efficiency, avoiding cavitation and vibration. Here's a look at relevant codes and best practices. 

5. Managing power through networked electrical systems

Engineers should consider the benefits of networking electrical systems-monitoring and controlling power, its usage, and how it affects system reliability. 

The list was developed using CFE Media's web analytics for stories viewed on csemag.com, November 3-9, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me