Top 5 Consulting-Specifying Engineer articles, May 4-10: Lighting and HVAC integration, CHW system design, 40 Under 40, more

Articles about lighting and HVAC integration, CHW system design, the 40 Under 40 program, Product of the Year finalists, and leveraging the BAS were Consulting-Specifying Engineer’s five most clicked articles from last week, May 4-10. Were you out last week? Miss something? You can catch up here.

05/11/2015


Consulting-Specifying Engineer Top 5 most read articles online, for May 4-10, covered lighting and HVAC integration, CHW system design, the 40 Under 40 program, Product of the Year finalists, and leveraging the BAS. Link to each article below.

1. Integration: Lighting and HVAC systems

By considering the first principles of radiative energy, engineers can determine how to balance daylight, electric light, and HVAC systems, particularly considering various options for daylight control and the advent of LEDs. 

2. CHW system design

Chilled water (CHW) systems are cooling systems that circulate CHW throughout a building for cooling and dehumidifying a building's air. They come in all shapes, sizes, and configurations. 

3. 2015 40 Under 40 Program

Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals in the engineering community supporting the building industry by recognizing and encouraging them through mentoring articles in the magazine, young engineer networking events, and the 40 Under 40 program. 

4. 2015 Product of the Year finalists

Who will win gold in 2015? Consulting-Specifying Engineer announced the finalists for this year's 11th annual Product of the Year competition, and readers will have the final word. Cast your vote online today. 

5. Leveraging the BAS

By using the building automation system (BAS) to its fullest extent, a school district was able to control its HVAC, electrical, and lighting systems. 

The list was developed using CFE Media's web analytics for stories viewed on csemag.com, May 4-10, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me