Top 5 Consulting-Specifying Engineer articles, May 12-18

Articles about selecting arc flash protection techniques, mitigating harmonics in electrical systems, considerations for building energy modeling, NFPA 110, and kinetic energy storage were the Consulting-Specifying Engineer's most-clicked articles from last week, May 12-18. Were you out last week? Miss something? You can catch up here.

05/19/2014


1. Criteria for selecting arc flash protection techniques, Part 2

Conducting an arc flash study to identify hazards and proper PPE and tools is critical in reducing the risk of arc flash incidents.

2. Mitigating harmonics in electrical systems

Although devices using power electronics can produce distortion in electrical distribution systems, it’s up to the engineer to apply effective solutions to mitigate them.

3. Considerations for building energy modeling

Here’s a review of initial energy modeling performed during a project from the interview phase to development of final models used for documenting compliance to energy codes or for LEED certification, through a client’s survey one year after occupancy. Here’s what works, what doesn't, and what value can be achieved from each step in the process

4. Critical Power: NFPA 110: Standard for Emergency and Standby Power Systems

In the Consulting-Specifying Engineer's May 8 webcast, Tom Divine, PE, Smith Seckman Reid Inc., and Kenneth Kutsmeda, PE, LEED, AP, Jacobs Engineering, discussed how consulting engineers who specify emergency power equipment for mission critical facilities will be impacted by new code requirements.

5. Kinetic energy storage fulfills a vital role for diverse applications

Data centers, hospitals, and other applications can benefit from the reliability, scalability, low cost of ownership, and other advantages kinetic energy storage systems offer.

The list was developed using CFE Media's web analytics for stories viewed on csemeag.com, May 12-18, for articles published within the last two months.

- Jessica DuBois-Maahs, associate content manager, CFE Media, jdmaahs@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me