Top 5 Consulting-Specifying Engineer Articles, June 5 to June 11: 2017 40 Under 40 winners, lighting protection systems, BIM, 2017 Product of the Year, NFPA 3 and 4.

Articles about DOAS, lighting controls, BIM, lighting protection systems, and performance-based energy design were Consulting-Specifying Engineer's five most clicked articles from last week, June 5 to June 11. Were you out last week? You can catch up here.

06/12/2017


Articles about DOAS, lighting controls, BIM, lighting protection systems, and performance-based energy design were Consulting-Specifying Engineer's five most clicked articles from last week, June 5 to June 11. Were you out last week? You can catch up here.Consulting-Specifying Engineer's top 5 most read articles online, for June 5 to June 11, covered design for DOAS, lighting controls, BIM, lighting protection systems, and performance-based energy design. Link to each article below.

1. Using performance-based design for DOAS

Performance-based design influences the specification of dedicated outside air systems (DOAS) products and systems.

2. Networked lighting controls

With the advent of building technology comes the need for monitoring and intercommunication between heating, cooling, electrical, lighting, fire/life safety, and other systems for optimized efficiency and operation.

3. Using BIM for project coordination

BIM is used frequently when working across multiple disciplines, which can prevent clashes across mechanical, electrical, plumbing, and fire protection engineering and with other stakeholders. 

4. Understanding lightning protection systems


Scientific advances improve lightning protection for mission critical facilities. 

5. Achieving energy performance-based design goals

Performance-based design allows design teams creative freedom when integrating energy efficiency strategies into a facility. 
This list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, June 5 to June 11, for articles published within the last two months. 

Joy Chang, digital project manager, CFE Media, jchang@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me