Top 5 Consulting-Specifying Engineer Articles, July 4-10: 40 Under 40, noise and vibration control, combined heat and power systems, more

Articles about 40 Under 40, noise and vibration control, combined heat and power systems, NFPA 99, and regulation of commercial, industrial fan efficiency are Consulting-Specifying Engineer's five most clicked articles from last week, July 4-10. Were you out last week? Miss something? You can catch up here.

07/11/2016


Consulting-Specifying Engineer's Top 5 most read articles online, for Jul. 4-10 covered 40 Under 40, noise and vibration control, combined heat and power systems, NFPA 99, and regulation of commercial, industrial fan efficiency. Link to each article below.

1. 40 Under 40

Consulting-Specifying Engineer magazine wants to shape the future of young engineers, and will do so by recognizing and encouraging them through mentoring articles in the magazine, young engineer networking events, and the 40 Under 40 program.

2. Noise and vibration control in building design

The acoustical environment in a building-good or bad-is the result of design. For optimal occupant comfort and facility functionality, attention to noise and vibration issues should be included early and throughout the building design and construction process.

3. Applying combined heat and power systems

Cogeneration systems, often referred to as combined heat and power (CHP) systems, generate both electricity and thermal energy. As they become more common in the United States, engineers must understand the nuances and design strategies for successful application.

4. NFPA 99: Electrical changes to the 2015 edition

NFPA 99: Health Care Facilities Code (2015 edition) covers a broad range of criteria for health care facilities. Electrical engineers need details about the changes to the electrical portion of the code.

5. Regulation of commercial, industrial fan efficiency

The new proposed Department of Energy standard will drive changes on how engineers design air systems for peak fan efficiency.

The list was developed using CFE Media's web analytics for stories viewed on csemag.com, July 4-10, for articles published within the last two months.

Ksenia Avrakhova, production coordinator, CFE Media, kavrakhova@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me