Top 5 Consulting-Specifying Engineer articles, Feb. 24 – March 2, 2014

Were you out last week? Miss something? Here are the Consulting-Specifying Engineer's five most-clicked articles from last week, Feb. 24 – March 2, 2014, including articles about the 40 Under 40 program, avoiding corrosion in electrical systems, designing laboratory ventilation systems, lighting control, and a column about female engineers.

03/03/2014


1. 2014 40 Under 40 program

Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals in the engineering community supporting the building industry. We want to shape the future of young engineers, and will do so by recognizing and encouraging them through mentoring articles in the magazine, young engineer networking events, and the 40 Under 40 program. Note that nominations are now closed.

2. Avoiding corrosion in electrical systems

Properly specifying electrical products for highly corrosive environments will reduce overall long-term cost and risk of failure.

3. Designing laboratory ventilation systems

Proper ventilation in labs is required to promote and maintain safety and protection to life and property.

4. Lighting control requirements: What's current and what to expect

This article examines lighting control requirements in various codes and standards, commissioning these controls, and what engineers may expect in the future.

5. Female Engineers should get creative

An enhanced focus on creativity in engineering along with a reduced emphasis on classical tool collection may encourage women students to remain in the profession.

The list was developed using CFE Media's web analytics for stories viewed on www.csemag.com during the week of Feb. 24 – March 2, 2014.

- Jessica DuBois-Maahs, Jordan Schultz, associate content managers, CFE Media, jdmaahs@cfemedia.com, jschultz@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me