Top 5 Consulting-Specifying Engineer articles, Feb. 17-23, 2014

Were you out last week? Miss something? Here are Consulting-Specifying Engineer’s five most clicked articles from last week, Feb. 17-23, 2014, including articles about the MEP Giants Program, corrosion in electrical systems, laboratory ventilation systems, lighting control requirements, and VFD and motor strategies.

02/24/2014


1. Nominations open for MEP Giants Program

The MEP Giants program lists the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms in the United States. The in-depth analysis of these firms appears in the August issue and reveals what's going on in the industry and how it has changed over the past few years. Special emphasis is placed on commissioning firms in a separate report each October.

2. Avoiding corrosion in electrical systems

Properly specifying electrical products for highly corrosive environments will reduce overall long-term cost and risk of failure.

3. Designing laboratory ventilation systems

Proper ventilation in labs is required to promote and maintain safety and protection to life and property.

4. Lighting control requirements: What's current and what to expect

This article examines lighting control requirements in various codes and standards, commissioning these controls, and what engineers may expect in the future.

5. VFD, motor strategies for energy efficiency

A variable frequency drive (VFD) often is specified to save money by reducing energy consumption in pumps, fans, compressors, or any other motor loads that may be found in a typical building. These best practices will provide the engineer with information on how to specify a VFD to meet load conditions while achieving efficiency.

The list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, Feb. 17-23, 2014, for articles published within the last two months.

- Jessica DuBois-Maahs and Jordan Schultz, associate content managers, CFE Media, jdmaahs@cfemedia.com and jschultz@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me