TLC Engineering for Architecture Inc.: Florida Hospital for Women

Automation, controls; electrical, power; HVAC, mechanical; lighting; energy, sustainability; plumbing, piping; audio/visual

08/11/2016


Heat-exchanger room. Courtesy: TLC Engineering for ArchitectureEngineering firm: TLC Engineering for Architecture Inc.

2016 MEP Giants rank: 33

Project: Florida Hospital for Women

Location: Orlando, Fla.

Building type: Hospital/health care facility

Project type: New construction

Engineering services: Automation, controls; electrical, power; HVAC, mechanical; lighting; energy, sustainability; plumbing, piping; audio/visual

Project timeline: December 2011 to January 2016

MEP/FP budget: $48 million

Challenges

  1. The Florida Hospital for Women is one of three new health care facilities included in Florida Hospital's comprehensive plan, the hospital's second-largest capital investment in its 100-year history. The hospital integrates cutting-edge technology with a full spectrum of nationally recognized women's health services to extend world-class health care to women at every stage of life.
  2. General and isolation exhaust on the main roof. Courtesy: TLC Engineering for ArchitectureOne of the engineering challenges TLC encountered involved removing an existing grease trap located within the footprint of the intended site and providing four new ones outside the footprint of the new building. The new grease traps are at a higher elevation than the existing grease lines, which required lifting the grease to the higher elevation.

Solutions

TLC engineers responded to the challenge by designing a grease pump room with a holding tank at the lower elevation. The tank includes infrared level alarms that activate the compressed air pump and lift the grease to a higher elevation, allowing for natural gravity slope to move the grease to the new grease traps. The grease pump room is 100% exhausted with redundant exhaust fans and ultraviolet (UV) GI air scrubbers. The room is also equipped with a pressure monitor that eliminates odor in the facility by indicating negative airflow.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me