Thermal controls for data center system optimization

Emerson Network Power's Liebert iCOM thermal controls are designed to eliminate single points of failure as well as monitor and manage the data center environment and its thermal-management systems.

08/14/2015


Emerson Network Power's Liebert iCOM thermal controls are designed to eliminate single points of failure as well as monitor and manage the data center environment and its thermal-management systems. Courtesy: Emerson Network PowerEmerson Network Power's Liebert - iCOM thermal controls monitor and manage the data center environment as well as its thermal-management systems. The Liebert iCOM-S is designed to eliminate single points of failure and protect the cooling unit. The control uses machine-to-machine (M2M) communication and algorithms that use data from rack inlet sensors, pressure sensors, and supply air temperatures optimize airflow. The pre-programmed teamwork modes are designed to optimize and harmonize the thermal-management system, preventing units from working at cross-purposes, wear, and tear. The Liebert iCOM-S provides a single point for binding room sensors to cooling-unit control groups by detecting and configuring up to 4,800 wireless rack sensors for building management system (BMS) integration.

Emerson Network Power

www.emersonnetworkpower.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me