The National Electrical Safety Code 2017: Safety in Numbers

The 2017 NESC includes some major updates, as highlighted in this article.

07/27/2016


One of the oldest and most ubiquitous safety codes, the National Electrical Safety Code (NESC) is a rich source of safety practices associated with electric supply and communication systems. Every 5 years, NESC users come together and go through a rigorous review to ensure the code stays up-to-date and relevant for the protection of the public, utility workers, and utility facilities.

Many hours were spent revising and updating the code to continue the legacy of providing best practices for safety of electricity supply and communication utility systems to both public and private utilities. The 2017 NESC includes some major updates, as highlighted below and in this infographic:

  • Rules 92C1 & 96C: Exceptions were added to exempt four-grounds-in-each-mile requirement under specific limiting conditions.
  • Rule 110A: Revisions address safety sign locations, adjoining fence restrictions, and impenetrable fence modifications.
  • Rule 124A1: Revised to require Electric Supply Station clearance values in Tables 124-1 and 110-1 to have appropriate atmospheric correction factors applied for altitudes above 1,000 m (3,300 ft).
  • Rule 215C2-C8: Guy insulator rules were rewritten and reorganized to make them easier to understand and apply with the voltage-transfer rules associated with guy insulators being removed.
  • Rule 238C: Now requires a 1.02-m (40-in) vertical clearance between luminaires that are not effectively grounded and communication cables and equipment located in the communication space.
  • Rule 250C: Replaced the reference for extreme wind map from ASCE-7 to ASCE-74.
  • Rule 261H1: Information was added regarding Aeolian vibration and mitigation methods.
  • Rule 354D: Exceptions were added to exempt the number of grounds-in-each-mile requirement under specific limiting conditions.
  • Rule 410A3: Revised to include new requirements and exceptions for protecting workers with arc-related clothing and equipment.
  • Rule 420K: Revised to include new requirements for the use of fall protection equipment.

The 2017 Edition of NESC is available now for presale and will be shipped Aug. 1, 2016.

-Michael Hyland is NESC chair and senior vice president of engineering services at the American Public Power Association (APPA). This article originally appeared on IEEE. IEEE is a CFE Media content partner.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me