The cost of building green

How much additional will a green project cost?

04/01/2009


When “Green Construction” is discussed, the focus inevitably turns to cost, as discussed in an article by RSMeans . How much additional will the green project cost? Some organizations are opposed to any additional first costs while others have some tolerance for additional expenditures.

The most prominent standard for green buildings is the U.S. Green Building Council . The USGBC LEED program has four levels of green certification: Certified, Silver, Gold, and Platinum. These levels represent increasing levels of sustainability.

There have been numerous studies aimed at comparing the cost of a LEED certified building to traditional designs. The average additional cost quoted is in the range of 2% to 5%. Based upon commercial building costs of $150/sq ft to $250/sq ft, this is equivalent to a $7.50 to $12.50/sq ft premium for building green. The majority of this cost is due to the increased architectural and engineering design time necessary to integrate sustainable building practices into the projects.

Another additional cost is for commissioning. Commissioning is the process of ensuring that the systems are designed, installed, functionally tested, and capable of being operated and maintained to conform to the design intent. According to Lawrence Berkeley National Laboratory , commissioning can save as much as 40% of the buildings utility bills for HVAC.

Read the full RSMeans article

Comment below: Do you think green construction costs more?





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me