Switchgear Helps Plant Get Up and Running With Internet Speed

When an Internet broadband communications company was making plans for a new 100,000-sq.-ft. data center in the Midwest, switchgear and standby-power equipment selection was a crucial part of the process. In addition to demanding design specifications, the project also had an aggressive construction schedule requiring maximum vendor responsiveness.

12/01/2002


When an Internet broadband communications company was making plans for a new 100,000-sq.-ft. data center in the Midwest, switchgear and standby-power equipment selection was a crucial part of the process. In addition to demanding design specifications, the project also had an aggressive construction schedule requiring maximum vendor responsiveness.

Planning for the center began in early 2000. It is designed to support a range of customer needs, from transmitting high-bandwidth video, voice and other data streams to providing outsourced IT services. Switchgear and standby power would be supporting the entire facility, which includes server farms, rectifiers, all mechanical systems, phone switches, all lighting loads and desktop PCs. Although planners only anticipated one or two outages a year, any disruption not easily addressable by backup power systems could cost the center's operators millions of dollars.

To meet both project requirements and schedule demands, the selected manufacturer modularized its design to provide one 800-amp bay and one 6,000-amp bay, each connected to five 1,500-kW generators. The package, which supplies the new facility with 20 MW of standby generator power and 4.5 MW of online UPS backup, arrived approximately nine months after it was ordered and was up and running with the rest of the data center within a year after construction began.

The switchgear was designed in small, multifunctional subassemblies, allowing the manufacturer to standardize components. This modular approach also provided facility engineers flexibility to mix and match subassemblies to create a site-specific design without affecting the overall schedule. Included is a high-resistance grounding scheme intended to allow continued operation during ground-fault conditions without shutting down the standby-power system. An additional feature allows facility personnel to track down a ground fault while the system is still operational.

Service has been a key issue in assuring the data center designers' satisfaction with the new switchgear, engineers say.

"At one point the general contractor was trying to lift one of these 60-foot bays to the 7th floor and the tie straps broke," says Eric Gromko, president of Morrison, Colo.-based EG Power Engineering. "Of course, this did some damage to the switchgear, but [the manufacturer] was right on it and made necessary repairs and adjustments immediately."

From Pure Power, Winter 2002





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me