Swedish refinery to be upgraded

Honeywell has been contracted by Preem AB to modernize the Preemraf Lysekil refinery in southern Sweden with industrial process controllers to triple the capacity of the current controllers at the refinery.

11/06/2013


Honeywell has been contracted by Preem AB to modernize the Preemraf Lysekil refinery in southern Sweden with industrial process controllers to triple the capacity of the current controllers at the refinery. Courtesy: HoneywellPreem AB selected Honeywell to modernize the Preemraf Lysekil refinery with Honeywell’s Enhanced High Performance Manager (EHPM) industrial process controllers.

The project should significantly extend the life of the existing control system at the refinery, located in southern Sweden. Preem AB, Sweden's largest oil producer, will use the process controllers to triple the capacity of the refinery’s existing controllers.

Preem AB has an annual refining capacity of more than 18 million metric tons, accounting for 75 percent of refining capacity in Sweden and about one-third of the entire Nordic region. Preem AB is the largest supplier of ultra-low-sulfur diesel fuel in Sweden, with a sulfur content of less than 5 ppm (parts per million), significantly lower than the Euro 4 requirement of 50 ppm.

The upgrade will be completed during planned maintenance at the refinery and will not require any additional downtime. It is scheduled to be completed before the end of the year.

Honeywell

www.honeywell.com 

- Edited by CFE Media. See more PID and APC stories.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me