Surge protector for electrical ac mains

ZoneMaster and ZoneSentinel Type 1 models by MTL Instruments

03/12/2012


MTL Instruments’ new ZoneMaster PRO Type 1 and ZoneSentinel Type 1 models allow users to install UL1449 3rd Edition listed premium surge protection before or after the main building disconnect. These models, listed at 20 kA in level, can be installed in a UL96A-certified lighting protection system. The versatility and flexibility of the ZoneMaster PRO Type 1 makes it well-suited for switchgear, distribution, and branch panels in a broad range of applications. The Type 1 ZoneSentinel can be used for distribution boards and small service entrance locations to provide both cost-effective and premium surge protection. The ZoneMaster PRO Type 1 features all mode protection and options to meet the most complex protection requirements. With replaceable, bolt-in modules, the ZoneMaster PRO Type 1 delivers enhanced redundancy, thermal, and short-circuit fusion and a fault monitor and audible alarm. The ZoneSentinel can be used alone or in combination with a ZoneMaster to provide the lowest suppression voltages available in the industry.

MTL Instruments

www.mtl-inst.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me