Surge protection devices: UL 1449 approvals for overvoltage protection

Mersen, formerly Ferraz Shawmut, introduced its new X series line of UL 1449 third edition approved surge protection devices (SPDs). SPDs help protect people and equipment from harmful transients.

05/13/2011


Mersen, formerly Ferraz Shawmut, introduced its new X series line of UL 1449 third edition approved surge protection devices (SPDs).Mersen, formerly Ferraz Shawmut, introduced its new X series line of surge protection devices (SPDs), the Surge-Trap Type 1 X-Series, which provide overvoltage protection for all locations in the facility with the smallest footprints available, the company said. The new X-Series SPDs, with UL 1449 third edition approvals, have Mersen TPMOV (Thermally Protected Metal Oxide Varistor - see below) technology inside.

The introductions includes the Surge-Trap XR series, which provides overvoltage protection for distribution branch panels, control panels and equipment. The advanced performance Surge-Trap XP series provides overvoltage protection for larger distribution panels and branch panels. The Surge-Trap XT series offers advanced technology surge protection and provides high-end protection for critical locations and service entrance gear, the company said.

“Almost 80% of overvoltage problems are caused by problems generated within the facility,” said Janelle Woodfall, Mersen product manager. “To prevent damaging overvoltage problems, proper surge protection devices need to be used in a cascading method throughout the facility.”

SPDs play a critical role in helping to protect people and equipment from harmful transients. It is especially important within industries, such as agriculture, automation, pulp & paper, renewable energy, telecommunications, transportation and water treatment industries, as well as within any industrial, commercial or residential environment where overvoltage problems caused by internal power disturbances are common, the company said.

“There are many SPDs on the market that no longer meet the UL1449 standard. To know if a SPD product is in compliance, look for the UL holographic label on the device. If it has a UL holographic label, the SPD is in compliance. If it doesn’t have one, it does not meet the new UL 1449 Third Edition standard,” explains Woodfall.

The Surge-Trap Type 1 X-Series SPDs are rated for NEMA 4X enclosures and suited for system voltages from 120 V to 600 V. They have a 20 kA (In) nominal discharge current and high 200 kA short circuit current ratings (SCCR). Agency approvals include UL 1449 third edition, IEC 61643, CE, ANSI/IEEE C62.41 (XR-series), RoHS compliant, and UL 96A lightening protection master label.

http://us.ferrazshawmut.com/catalog/surge-protection/surge-trap-spd

About Mersen TPMOV: Mersen Thermally Protected MOV has been developed to assist in eliminating the failure characteristics of Metal-Oxide-Varistors. The TPMOV is a fail-safe device. It is composed of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal-oxide disk. In the event that the disk is approaching breakdown it is effectively disconnected from system power, the company said.

About Mersen: Mersen, formerly Ferraz Shawmut, describes itself as a global expert in high-performance materials for extreme environments and in the reliability and safety of electrical installations. The electrical and circuit protection division provides a comprehensive line of current-limiting fuses (low voltage, general purpose, medium voltage, semiconductor, miniature and glass, and special purpose) and accessories, fuse blocks and holders, power distribution blocks, low voltage disconnect switches, surge protection, high power switches, heatsinks, thermal management and other products.

For related news and products see:

www.controleng.com/integration

www.csemag.com/index.php?id=2309

Attend Arc Flash University at

www.plantengineering.com/media-library/webcasts.html

- Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.