Superconducting transmission cable reaches commercialization

The first application of high-temperature superconducting (HTS) cable in a commercial power grid was commissioned this spring by the Long Island Power Authority.

09/01/2008


The first application of high-temperature superconducting (HTS) cable in a commercial power grid was commissioned this spring by the Long Island Power Authority. The 138 kV system can transmit up to 574 MW when operating at full capacity.

HTS cable is seen as one potential resource for addressing today’s transmission-congestion concerns because the material can conduct up to 150 times the electricity of similarly sized copper wires, according to cable manufacturer American Superconductor Corp., Devens, Mass. The cable is installed with a liquid nitrogen refrigeration system to maintain the core at cryogenic temperatures.

HTS cables provide an increase in power capacity at lower voltages, enabling easier siting and making it an ideal solution for reducing urban power bottlenecks. Proven to extend the operating life of high-load corridors, the cables also manage to maintain a low impact on the environment.

The U.S. Dept. of Energy helped fund the $58.5 million project. A second phase will involve replacing one of the existing cable’s phases with a new cable from American Superconductor’s second-generation offering. The system also will incorporate the company’s Secure Super Grids technology, which is designed to suppress service-disrupting power surges.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me