Static transfer switches are designed for critical infrastructure applications

GE's Critical Power's Zenith STS-3 Series three-phase static transfer switches and Zenith STS-1 Series single-phase static transfer switches are designed for critical infrastructure applications.

05/14/2014


GE's Critical Power's Zenith STS-3 Series three-phase static transfer switches and Zenith STS-1 Series single-phase static transfer switches are designed for critical infrastructure applications. (Pictured: STS-3 Series). Courtesy: General ElectricGE Critical Power (NYSE: GE) released the GE Zenith STS-3 Series three-phase static transfer switches and GE Zenith STS-1 Series single-phase static transfer switches for critical infrastructure applications.

The GE Zenith STS-3 static transfer switches provide power source redundancy in UPS system architectures to increase product mean time between failure between the power source and the critical load, using features such as internal triple redundancy of control power and logic.

GE's STS-3 Series units meet key technical requirements by performing out-of-phase transfers between power sources without undue inrush current on the electrical system when power distribution unit transformers are employed on the load side of the static transfer switch.

The GE Zenith STS-1 Series static transfer switches provide a single-phase solution for customers who want to deploy the switches in a rack-mount form factor to provide dual input source capabilities to rack-mounted single-cord information technology (IT) servers or other non-IT critical process equipment.

GE Zenith STS-3 Series three-phase units are ideal for data center, telecommunications, financial and industrial critical infrastructure customers seeking centralized power source redundancy, while the GE Zenith STS-1 single-phase static transfer switches are for point-of-use power source redundancy at the localized rack level.

General Electric (GE)

www.ge.com 

- Edited by CFE Media. See more Control Engineering energy, power products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me