Standby generators

Generac Power Systems’ 350 and 400 kW gaseous-fueled standby generators are available as a single unit or configured in parallel up to 6 MW and designed as a natural gas alternative to diesel standby power systems.

05/05/2014


Generac Power Systems’ 350 and 400 kW gaseous-fueled standby generators are available as a single unit or configured in parallel up to 6 MW and designed as a natural gas alternative to diesel standby power systems. Courtesy: GeneracGenerac Power Systems’ 350 and 400 kW gaseous-fueled standby generators are available as a single unit or configured in parallel up to 6 MW. They are designed as a natural gas alternative to diesel standby power systems. A Generac 21.9L V12 turbocharged after-cooled engine powers both units. Both generators are factory EPA certified for stationary emergency power, and SCAQMD (California’s South Coast Air Quality Management District) certified. The generators are listed to UL2200 and certified to CSA C22.2. They are available in open-set, weather-protected, and Level1/Level 2 sound attenuated enclosures. 

Generac Power Systems 

www.generac.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me