Smart Grid controls, instrumentation enable reliability, efficiency

Automation and instrumentation facilitate smarter electrical grids, higher reliability systems, as well as smaller and fewer outages, with faster troubleshooting and repairs. See related Smart Grid demonstration explanation and photos from NIWeek conference.

08/23/2011


The most widely accepted assumption about the Smart Grid evolution is the need for fundamental changes in electrical grid technologies and their management. At present, customer services and environmental benefits are at the heart of this change. These will certainly enable enhanced grid operations, but a critical aspect of this change will take place in the control and instrumentation arena.

A Smart Grid demonstration at NIWeek 2011 showed how National Instruments automation facilitates recovery and troubleshooting after outages from a tree, squirrel, or lightning, vastly limiting the number of customers without power and pinpointing areas ofThis change will be the catalyst for an essential shift in the physical grid, specifically between the substation and customer service points. If the goal is to make electrical grids self-healing and operationally efficient, then utilities will have to give serious consideration to the control engineering aspects of the physical electrical grids. Control and instrumentation will play a key role in the success of Smart Grids, as better protection and measurement of operational intelligence significantly enhances grid operations. Although control and measurement technologies (including protocols to interact with field devices) have been proven, systems will need to be upgraded and implemented in the right context.

One example of this would be that utilities can detect an outage even before the customer calls, which is a key benefit of smart meters today. The same benefits can be realized using instrumentation and controls at locations on the grid, where they can be integrated with the utility’s demand management system/outage management system (DMS/OMS) and other IT software (such as CIS-computer information systems, WMS-workload management systems, etc.).

Smart Grid technology implementations help utilities detect outages before the smart meter sends out the last kilojoule and also help minimize the impact of outages using better protection schemes and isolation mechanisms. This requires integration between the measurement, operations, and IT systems to derive the necessary operational and business intelligence―thus making the grids smarter, safer, more efficient, and ever more resilient. And while electrical control systems are matured technologies, they must be leveraged to deliver the best value for the Smart Grid. [See related Smart Grid technology story, below.]

Ashiss Kumar Dash is AVP - utilities and head - Smart Grid, and Devendra Vishwakarma is principal consultant, Smart Grid practice, Infosys Limited; Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com

www.infosys.com/industries/utilities/industry-offerings/Pages/smart-grid.aspx 

www.controleng.com/channels/process-control.html 

Smart Grid avoids longer, wider dumb grid outage, NIWeek demo showed

At NIWeek, Bill Kramer, PhD, senior research engineer, electricity, resources and building systems integration, National Renewable Energy Laboratory (NREL), said National Instruments software and hardware are helping with application-specific next-generatA Smart Grid demonstration at NIWeek 2011 (see photos) showed how National Instruments automation facilitates recovery and troubleshooting after outages from a tree, squirrel, lightning, or similar electrical faults, vastly limiting the number of customers without power. The system also pinpoints areas of damage for faster repairs. National Instruments helped power the demonstration showing nearly instantaneous recovery from an outage with a Smart Grid, as opposed to a wider, lengthier outage with a dumb grid.

In back of the demonstration (above), Bill Kramer, PhD, senior research engineer, electricity, resources and building systems integration, National Renewable Energy Laboratory (NREL), explained how software and hardware from companies [including National Instruments] are helping with application-specific next-generation Smart Grid technologies.

www.niweek.com 

www.ni.com 

www.nrel.gov/eis/smart_grid.html

Search “smart grid” atop www.controleng.com, www.csemag.com, and  www.plantengineering.com, for related information.

- Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.