Sensor-operated faucets

Moen Incorporated’s M•Power sensor-operated faucets feature hands-free activation that starts and stops water flow to prevent waste.

09/09/2013


Moen Incorporated’s M•Power sensor-operated faucets feature hands-free activation that starts and stops water flow to prevent waste. Courtesy: Moen IncorporatedMoen Incorporated’s M•Power sensor-operated faucets feature hands-free activation. These faucets have a motion sensor that starts and stops the flow of water, automatically reducing daily gallons used, reducing sewage bills, limiting hot water consumption, saving energy, and preventing the risk of accidental overflow. M•Power sensor-operated faucets help prevent waste and possible overflow via a sensor eye. It also has above- and below-deck electronics installation options based on sink styles or building preferences. Two above-deck M•Power faucet models feature a built-in handle for manual operation and temperature control. Each faucet is powered using lead-free AA alkaline batteries or a low-powered ac adaptor and comes equipped with a water-conserving, vandal-resistant aerator.

Moen Inc. 

www.moen.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me