Sensirion moving into new building in Switzerland

Sensirion's new manufacturing building, in Stäfa, Switzerland, opened in July 2011, providing additional space for the sensor company and highly automated production.

08/23/2011


Sensirion inaugurated its new production building in mid-July 2011. After eight months of construction, the newly purchased production plant in Stäfa, Switzerland, situated just a few hundred meters from the main building, was ready for occupancy. With the purchase and renovation of the building, the sensor manufacturer has developed additional space, which has become necessary as a result of the growth in recent years, the company reported.

In the near future, the building will house the entire production of the high-tech company, while the development and sales departments will remain in the main building along with the administration. Highly automated production lines have now been built over 10,000 m2 space on three floors. The core of the production plant consists of four clean rooms for the manufacture of innovative sensor solutions for measuring moisture, temperature, gas and liquid flows as well as differential pressure. The largest ISO-6-certified clean-room offers 1,000 m2 of space.

Sensirion's new production building is based on the latest building services technology. Enormous energy savings have been achieved with air conditioning provided by geothermal probes and heat pumps as well as an internal cooling system equipped for heat recovery. During the planning phase, great emphasis was also placed on issue of security. The new building has automatic fire suppression systems, smoke extraction units and is divided into different autonomous fire compartments, which guarantee high operational safety and thereby also supply security.

www.sensirion.com 

Sensirion

- Edited by Chris Vavra, Control Engineering, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me