Send in the engineering troops: Electrical and power systems

Military facilities present an army of challenges—exacting codes and regulations, stepped-up security issues, and budgetary concerns. Power and electrical systems are high on the priority list.

07/24/2013


Kevin D. Bomboy, PE, LEED AP, Chief mechanical engineer, STV Group, Douglassville, Pa. Courtesy: STV GroupDavid Callan, PE, CEM, LEED AP, HBDP, Vice president, McGuire Engineers Inc., Chicago. Courtesy: McGuire EngineersRobert L. Crance, Mechanical engineer, Black and Veatch, Overland Park, Kansas. Courtesy: Black and VeatchJoseph H. Talbert, PE, ARM, Project manager, Aon Fire Protection Engineering, Lincolnshire, Ill. Courtesy: Aon Fire Protection EngineeringWilliam Valdez, Northwest justice and civic sector leader/principal, DLR Group, Seattle. Courtesy: DLR Group

Participants:

  • Kevin D. Bomboy, PE, LEED AP, Chief mechanical engineer, STV Group, Douglassville, Pa.
  • David Callan, PE, CEM, LEED AP, HBDP, Vice president, McGuire Engineers Inc., Chicago
  • Robert L. Crance, Mechanical engineer, Black & Veatch, Overland Park, Kansas
  • Joseph H. Talbert, PE, ARM, Project manager, Aon Fire Protection Engineering, Lincolnshire, Ill.
  • William Valdez, Northwest justice and civic sector leader/principal, DLR Group, Seattle

CSE: What’s the one factor most commonly overlooked in electrical systems in military facilities?

Bomboy: The design of the lighting system and lighting controls has become more complex. The UFCs address footcandle levels that are difficult to achieve and still remain within the allowable power densities. Techniques such as vacancy controls, daylighting, task lighting, and efficient fixtures, ballasts, and lamps must be applied to meet all design criteria. 

CSE: Is power reliability more of a concern with military facilities than other structures?

Bomboy: Providing power reliability for military facilities is no different from doing so for the private sector market. The reliability is based on the needs of the user and the functions contained within the building. Although the likelihood of a military project requiring more reliable power may be greater, the techniques to accomplish a high level of reliability are no different. 

CSE: How have sustainability requirements affected how you approach electrical systems?

Bomboy: Sustainable requirements have affected all aspects of lighting design. Additional care must be exercised with the selection, specification, and layout of the lighting fixtures and lighting control system. 

CSE: Have you had experience with photovoltaic (PV), wind turbine, or other renewable energy projects at a military facility? If so, describe it.

Bomboy: Photovoltaic electric and solar hot water has had limited success in our military projects. The photovoltaic systems have had success when there are offsetting incentives from utility companies. To reduce natural gas or electrical demand, solar hot water panels have been used successfully to preheat the water supply to the conventional hot water systems. The hot water generated by the panels is stored in an insulated tank to help meet the high short-time demands for hot water, such as for showers or laundries in barracks. 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me