Sealed unit line for commercial refrigeration

Embraco's Plug n' Cool (EPC) sealed unit line is a complete cooling solution designed for refrigeration compressor replacements or retrofits that uses R-290 refrigerant and is designed for commercial use.

02/03/2015


Embraco's Plug n' Cool (EPC) sealed unit line is a complete cooling solution designed for refrigeration compressor replacements or retrofits that uses R-290 refrigerant and is designed for commercial use. Courtesy: EmbracoEmbraco's Plug n' Cool (EPC) sealed unit line is a complete cooling solution designed for commercial refrigeration compressor replacements or retrofits. EPC units use R-290 refrigerant and is ideal for grocery store and supermarket use. It also features an efficiency variable speed reciprocating compressor for 15 to 37 cubic ft coolers. It is a sealed unit, shipped fully charged with R-290, around which OEM design engineers can build market-ready, water-cooled display systems. The fully charged units eliminate the need for manufacturers to install R-290 charging equipment. The units are also designed to create very little noise or vibration while in use.

Embraco

www.embraco.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me