San Francisco targets 100% renewable energy by 2020

The government of San Francisco is strengthening its commitment to renewable energy by installing solar panels on its City Hall roof.

03/28/2011


The city government will begin calling for bids from solar panel companies next month for the mounting of photovoltaic cells on the roofs of the San Francisco City Hall and the Davies Symphony Hall, a local music hub. Solar panel installations will also push on in public buildings in government subdivisions like Chinatown and Potrero Hill.

“We want the whole city in 2020 to be powered 100 percent by renewable energy,” said Edwin Lee, Mayor of San Francisco, in a speech before solar energy enthusiasts last week. “Not just municipal,” said Lee. “Everybody has got to do that. Everybody. We want the whole city in 2020 to be 100 per cent renewable energy.”

The Mayor is encouraging an increase in reliance on renewable energy not only for the public sector, but for all sectors in society. At present, the city produces 17 megawatts of solar electricity. The installation of solar panels in public buildings is a project that supports the wider initiative of the state of California to reduce the rate of its carbon emissions and energy usage.

California, although a national leader in environmental protection and energy efficiency, is the 12th largest emitter of carbon globally. In response to the problem, the state government passed its Global Warming Solutions Act of 2006, which seeks to create a comprehensive program to decrease greenhouse gas emissions from all sources within the state. The Act compels the California Air Resources Board (CARB) to establish market mechanisms and guidelines to pull down California’s greenhouse gas emissions back to 1990 levels by 2020.

The installation of solar panels on the roof of the City Hall and the Davies Symphony Hall was initiated over a year ago. Its implementation was delayed due to conflicts among labor unions as to who was authorized to conduct solar work. According to information from the San Francisco Public Utilities Commission (SFPUC), the SFPUC has decided to move on with the project despite the conflict.

- Edited by Gust Gianos, Consulting-Specifying Engineer, www.csemag.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me